De Royal TobaccoDRT 3D Studio
Pack mock-ups at true relative size. Every SKU keeps its own art, sizes, shape, light and background.
Pack
Stick rotation
Click any stick in the 3D view to turn it on its own. Click empty space to deselect. "Turn logos to camera" assumes the logo sits in the middle of your stick wrap PNG.
Corners
Collar
Ribbed edges need round corners. Switch to Round corners to use them.
The top edge round-over runs along the front, sides and back of the sealed Fresh Seal top. The collar height never changes: the curve eats into the corner, and the tray sits slightly lower so the outer sticks stay under it, which is why a big radius needs some Inner tray lift.
Protrusion is how far the tallest stick rises when the pack is open; the others follow in step. Inner tray lift is a spacer under the sticks and inner frame, so they sit higher in the box, capped so the frame still fits under the closed lid. Switching style loads its corner and edge preset.
Both are measured down from the top of the box, so the box height never changes. Front is where the cap meets the body on the front panel; back is where the hinge crease sits. Each pack style keeps its own setting.
Skin
Fit
Set the PNG to the panel's proportion for a perfect fit. Transparent areas print as white board. Back uses the front art until you upload one. Inner collar art covers the part that shows above the pack; stick wrap runs filter end at the top.
Logo overlay
A logo PNG sits on top of the panel art and keeps its own proportions. Drop it on the model with "Drop PNG as: Logo", or upload it here, then size and place it.
No logo on this panel
Sizes in this SKU, mm
The pack size leads. Sticks shrink slightly in diameter, or shorten, whenever needed so they always sit inside the pack and foil. Arrangement is sticks per row, front to back, like 7-6-7. Turn off sizes this SKU does not come in.